Landoll 300
XLP-6

STANDARD EQUIPMENT

   
*Capacity: 16,000 Lbs.
Deck Rating: 16,000 Lbs. In 10 Foot
Estimated Base Weight: Pintle Hook 9,000 Lbs. Gooseneck 9,800 Lbs.
Main Frame: 30 Lb. 10" Structural I-Beam
Crossmembers: 2"x 2" Tube
Slope Drop: 90 Degree
Parking Stands: Pin Drop
Tires: 235 80R 16 LRE Mile Star Radials
Wheels: 8 Hole Steel Budd Type Disc
Axles: 2-10,000 Lb Tandem Duel Tire, Oil Bath Bearings (P/N132018 Dexter as of 6/04)
Suspension: 5 Spring Multi Leaf
Brakes: 12-1/4" x 3-3/8" Electric Brakes
Oil Seal Hubs: Internal Mated Assembly
Hitch: Gooseneck or 5' Pintle
Pin Setting: 8 1/2 Inches
Swing Clearance: 78 Inches
Loaded Ground Clearance: 25 Inches
Loaded Deck Height: 38 Inches
Width: 102 Inches
Decking: 1 3/8" Apitong
Air/Electrical: 7 Way Receptacle
Hydraulic Hook Up: Quick Couplers 2500 PSI/17 GPM
Lights: Sealed, Potted, "LED" , grommet Mounted with Sealed Wiring Harness
Finish: Steel Grit Shot Blast to Bright Metal
Powder Coat Color: White/Black/Yellow/Blue/Red/Green
Tie Downs: (4) "P" Loops
Tool Box: Curbside (11" H x 22" D x 36" W) with Lockable Door
Hydraulic Winch: Worm Gear 12,000 Lb. With 85' of 1/2" Cable.
Tilt Cylinders: 1- 4" x 42" (G) or 2- 4" x 24" (P)
Undercarriage Cylinder: 1- 4" x 126"
Load Angle: 7 Degree
Accessories: Approach Plate with Four Keyhole Tie Downs
Hydraulic Valve Body: Prince Valve
*Capacity ratings are frame capacities only. Actual load capacities may be restricted by factors such as gross axle weight rating (GAWR) or state and federal regulations.

Specifications subject to change without notice.



MODEL A B C
300B-32-G 39' 32' 28' 5
*Indicates dimension may change due to options indicated.

OPTIONAL EQUIPMENT

BRAKES:
Air Brakes with 12.25" x 4" Drum Type Brakes in Lieu of Std.  
  - (Change made from Hayes to Dexter 6/04)
 
Air Over Hydraulic-Disk (for Tractor with Full Air) in Lieu of Std.  
Brake Kit-Installed (Specify Truck Make/Model)  
Brake Kit-Not Installed (Specify Truck Make/Model)  
Low Vacuum Warning Kit-Installed  
Low Vacuum Warning Kit-Not Installed  

TIE DOWN RINGS:
Additional Tie-Down "P'' Loop with Lynch Pin  
Flush Mount "D" Rings  
Recessed Mount "D" Rings  
Ratchet Winch for 4" Nylon Strap - Weld On - Less Strap - One Side Rub Rail Required (Each)  

HITCH:
Fifth Wheel Hitch in Lieu of Std.  
Yoke Style Hitch in Lieu of Std.  
2 5/16" Ball Hitch  
Truck Hitch Base (Specify for Dodge) Installed  
Truck Hitch Base (Specify for Dodge) Not Installed  
Swivel Hitch Installation on Customer Bed (Chevy-Ford)  

WINCH AND ACCESSORIES:
20,000 lb. Worm Gear Winch w/85' Cable in lieu of 12,000 lb. winch  
  - Standard
 
Guard, Winch 12/20K (cannot be used in conjunction with Pivoting Cable Roller Guide)  
Wireless Remote Control - Six Function with Prince valve body (Orders after 03-20-06)  

DECK AND ACCESSORIES:
Extra Side Mounted Tool Compartment  
Skid Plate for Container with Formed Angle Guide 5/16" x 12" x 3 1/2"  
1/8" Steel Tread Plate in Lieu of Std.  
Over width Extensions (2-Section - 9" W x 4' L Each)  
Upper Deck- 7' x 8' with 4 Tie-Down "P" Loops  

HYDRAULIC POWER SOURCE:
27 H.P. Engine Package-Under slung  
Air Shift PTO & Wet Kit for Tractor-Not Installed  
Installation of PTO & Wet Kit (Wire Control)  

TIRES AND RIMS:
Spare 235 80R 16 Mile Star Tire & Rim  


NewTowTrucks.com