Landoll 425
XLP-6

STANDARD EQUIPMENT

Capacity: 50,000 Lbs.
Deck Rating: 30,000 Lbs. in 16 Ft.
Estimated Base Weight: 16,800 Lbs. + / - 3%
Main Frame: Fabricated 100,000 Psi Yield Four Beam Design
Crossmembers: 4" x 4" Tube on 8" Centers
Slope Drop: 90 Degree
Parking Stands Jost Two Speed
Tires: 10R 17.5 LRH Double Coin
Rims: 17.5x6.75 Tubeless
Wheels: Hub Pilot/Steel Outboard Brake Drums
Axles: 2 - 25,000 Lb. Tandem Dual Tire, Oil Bath Bearings
Suspension: Neway RLU228 Air Ride 22,500 Lb. Capacity
Brakes: 12.25x7.5 Full Air/Spring Brakes ABS, 4S2M
Oil Seal Hubs: Internal Mated Assembly
Hitch: 5th Wheel King Pin
Pin Setting: 21 Inches
Swing Clearance: 81 Inches
Loaded Ground Clearance: 8.5 Inches
Loaded Deck Height: 38 Inches
Width 102 Inches
Decking: 1-3/8" Apitong Hardwood
Air/Electrical: 7 Way Receptacle
Hydraulic Hook Up: Quick Couplers 2500 PSI/17 GPM
Lights: Grote "SuperNova" LED-10 year warranty
Finish: Steel Grit Shot Blast to Bright Metal
Wiring Harness: Grote "Ultra-Blue Seal"-7 year warranty
Powder Coat Color: White/Black/Yellow/Blue/Red/Green
Tie Downs: Double Key Hole Chain Slots & Stake Pockets Alternating on 16" Centers
Toolbox: Twin Upper Deck Mounted Indeck Lockable Doors 6.5" H x 11.5" W x 29" D
Hydraulic Winch: Worm Gear 12,000 Lb. with Spring Tension & 85' of 1/2" Cable
Tilt Cylinder: 2 - 4-1/2" x 30"
Undercarriage: 2 - 4" x 100", Centralized Grease System; Accepts After-Market Dock Level Hydraulics System; Powder Coated Black
Load Angle: 7.5 Degrees
Accessories: Flat Approach Plate with Four Key Hole Tie Downs, Automatic Slack Adjusters, Dual Slope Rollers
Hydraulic Valve Body: Prince Electronic

Specifications subject to change without notice.


*Indicates dimension may change due to options indicated.

OPTIONAL EQUIPMENT
BULKHEADS:
48" High Steel Bulkhead (Mesh) 102" Wide, Powder Coated Black  
Bolt-on Binder Storage Rack for 48" Bulkheads  
Halogen Work Light-Dual (Mounted on Bulkhead)  
Spare Tire Carrier-48" Bulkhead, Front Mounted  
Spare Tire Carrier 48" Bulkhead, Rear Mounted  

PARKING STANDS:
Pin Drop in lieu of Std  
Hydraulic Parking Stands  

TIE DOWN RINGS:
Recessed Mounted "D" Rings (Each) (Not Totally Recessed w/Additional Crossmembers)  
Flush Mounted "D" Rings (Each)  
"D" Ring bolt at Winch (Each) (Two Locations Available)  
Ratchet Winch for 4" Nylon Strap-Weld On-Less Strap-1 Side Rub Rail Required  

WINCH AND ACCESSORIES:
All Winches Mounted on Upper Deck Only  
20,000 Lb. Winch with Spring Tension in Lieu of Standard 12K  
30,000 Lb. Winch DP Planetary with Spring Tension in Lieu of Standard 12K  
30,000 Lb. Winch DP Planetary with Air Tension, Air Shift, & Cable Guide (4-Way Rollers) in lieu of Standard 12K  
Delete Standard 12K Winch  
Guard, Winch 12/20K (cannot be used in conjunction with Pivoting Cable Roller Guide)  
Pivoting Cable Roller Guide for Winch-12K or 20K (Only)  
Pivoting Cable Roller Guide for Winch- 20K with Air Tension and Air Operated Winch Free Wheel  
Cable Guide (4-Way Rollers) for 12K, 20K, OR 30K winches, (May not use with Pivoting Guide)  
Wireless Remote Control-Six Function with Prince valve body  

DECK AND ACCESSORIES:
1/8" Steel Tread Plate Over Wood (Lower Deck Only)  
1/8" Steel Tread Plate in Lieu of Wood Std. (Includes Fourth 1x3)  
Deck Strap 1-1/4" x 9" (For Track Area)  
Frame with Tube Crossmembers to accept Pullouts  
  - Frames will have 4in Sq Crossmembers on 16in centers w/3in Jr I-Beams between tubes
 
27" Aluminum Pull-Out Side Extensions (Capacity not to Exceed 50% of Trailer Capacity)  
Rub/Chain Rail-Web Mount (Price per Foot of Rail)  
Under Coating  
1/8" Steel Tread Plate over Approach Plate  

SUSPENSION:
Air Weigh Digital Scale System  
Air Dump Valve  
Dock Level Hydraulics-62,000 Lb. (Dock Level Hydraulics not Available with Low Profile Tires)  

HYDRAULIC POWER SOURCE:
Hydraulic Engine Package - Uper Deck w/Cover Kohler 27 HP Gas  
Air Shift PTO & Wet Kit for Tractor-Not Installed (30 Gallon Tank Required)  
Installation of PTO & Wet Kit (Control) "NET LABOR"  
Hydraulic Quick Couplers 1 Male/1 Female (Matches Trailer) (Part# 105902)  

TIRES AND RIMS:
10R 17.5 Michelin Tires in Lieu of Std.  
235/75R 17.5 Double Coin Tires in Lieu of Std.  
235/75R 17.5 Michelin Tires on in Lieu of Std.  
Spare Double Coin Tire & Hub Pilot Type Rim (10R 17.5)  
Spare Michelin Tire & Hub Pilot Type Rim (10R 17.5)  
Spare Double Coin Tire & Hub Pilot Type Rim (235/75R 17.5)  
Spare Michelin Tire & Hub Pilot Type Rim (235/75R 17.5)  
17.5 Alum. Wheel (8 Bolt Polished) in lieu of Std. (Each)  
17.5 Alum. Wheel (8 Bolt Machined) in Lieu of Std. (Each)  
Hubometer  
Pressure Guard Air Inflation  

SPECIAL PRICES:
Paint over Galvanizing-Sides Only  
Paint over Galvanizing-Top Surface Only  
Hot Dip Galvanizing (Trailer Frame is Totally Submerged) -Adds mimimum of 3 weeks to delivery  

NewTowTrucks.com